2020 Stock Car Rules

Print this page
Posted January 10, 2020

Competitors Allowed
- Caney Valley Speedway may prohibit ANY driver from competing in this division at the officials’ discretion.
- Drivers must be at least 14 years of age, unless otherwise approved by Caney Valley Speedway.
- Drivers under the age of 18 must have a parent present and complete the minor release form.

Vehicles Allowed
- No race cars permitted- STOCK CARS ONLY (2 door or 4 door)
- May be front or rear wheel drive ( 4, 6, or 8 cylinder engines )
- No turbo or supercharged engines
- No convertibles
- No trucks
- No SUV’s
- No Jeep type vehicles
- No 4-Wheel Drive vehicles, no limousine, no hearses, no vans

Vehicle Rules
- Minimum 4 Point roll cage required
- Steel bar on driver door is permitted
- Minimum stock wheel base is 105” for 8 cylinder, and 88” for 4 & 6 cylinder engines.
- Gutting of factory interior panels allowed only for roll cage clearance.
- Inner door bracing may be removed to replace with door bars.
- All doors must be welded or bolted shut.
- Windshield must be removed.
- Side and rear window glass must be removed.
- All side mirrors and rear view mirrors must be removed.
- No mirrors are allowed.
- Screen or bars installed in place of windshield is required.
- Mesh window nets are permitted but must be removable.
- Racing seat and racing seatbelts are MANDATORY.
- Approved helmet and fire suit are mandatory.
- All burnable material (i.e. floor mats, headliners, rear seats, carpet, etc.) Must be removed.
- The rear seat shelf must remain in place as a fire stop.
- Any openings to the trunk area must be enclosed.
- Fuel cells permitted and may be placed in trunk area and securely fastened.
- No bracing in the bumper areas.
- Bumper to bumper steel uni-body must be retained.
- No cutting, chopping, channeling, or shortening allowed.
- No lightening permitted.
- No additional weight may be added.
- The stock steel unaltered floor plan, firewalls, trunk, and wheel wells must be retained.
- Cars must retain their stock appearance.
- Hoods must be kept in place at all times.
- Suspension parts must remain stock for the make and model.
- No alteration of stock suspension (i.e. no spacers, lumber, or chains etc.)
- Stock steel wheels only.
- DOT TIRES ONLY, (no DOT stamped racing tires, no truck tires, no treated tires)
- The engine must be strictly stock for the make and model.
- Original engine mounts must be utilized.
- No aftermarket external oil coolers.
- A/C & heat components may be removed.
- Smog equipment may be removed.
- Air cleaner to oil pan must be all factory equipment.
- Stock transmission and rear end only.
- No locked rear ends.
- All transmission lines must be covered or ran outside of driver area of car.
- Only one (1) radiator can be used.
- Radiator must remain in original position.
- No coolant or gas lines in driver area of car.
- Batteries may be relocated in a securely fastened covered plastic or rubber container.
- All plastic grills must be removed or replaced with screen mesh.
- Headlights, tail lights, and outer trim must be removed.